Description
HALL angle: 120°/240°
Multi-speed regulation modes
Maximum input voltage: 30V
Strong over-current self-protection function
Smooth torque output within speed range of 0-20000rpm
High efficient, slowly temperature rise and compact size
Electrical indexes
| Driver Parameters | Minimum value | Rated value | Maximum value | unit |
| Output current | – | 8 | 16 | A |
| Input voltage | 12 | 24 | 30 | VDC |
| Hall drive current | – |
20 |
– | mA |
| Hall signal votage | – | – | 5 | V |
| Applicable motor speed | – | – | 20000 | RPM |
Environmental indexes
| Environmental factors | Environmental indexes |
| Use occasion | Avoid dust, oil stain and corrosive gas |
| Operating temperature | 10℃~+50℃ |
| Environment humidity | 40-90%RH (no condensation) |
| Vibration | 5.9m/s2 Max |
| Storage temperature | -20℃~+125℃ |
| Cooling mode |
Natural cooling or forced cooling |
| Terminals | Function |
| SV | 1.External potentiometer; 2.Input analog signal; 3.PWM pulse width. |
| COM | Common port (0V reference level) |
| F/R | Motor rotation direction control(CW/CCW). High level input the motor will rotates clockwise, low level input or when F/R and COM are short circuit, the motor rotate anticlockwise |
| EN | High level input the motor stops, low level input or when EN and COM are short circuit, the motor runs |
| BRK | The motor brake stops when a high level is added or port suspension; the motor runs when the low level is added or EN and BRK are connected |
| ALM | The default output signal is 5V under normal circumstances; the level is 0V when malfunction occurs |
| SPEED | Output pulse frequency signal(OC). The motor speed can be calculated through SPEED. |
Four speed regulation modes
Build-in potentiometer RV
Rotate the RV knob clockwise, the motor starts to run and accelerate. Motor speed will decrease if anticlockwise.
When it gets to a limited position, the motor stops.
Reviews
There are no reviews yet.